VMP704- Leaping Vampyre Bat

Our 6’6” Vampyre Bat with a 15’ Wing span, lays in wait with it’s wings folded, resting on its back waiting for the perfect opportunity to spring into action and fly up and over your audience flipping into the perfect attack position. The wings dramatically snap open/closed with independent jaw function.

The standard version finishes at an amazing 14’ overhead, but 12’, 10’ & 8’ versions are also available.

VMP700- Vampyre Feasting Tableau- made of steel and urethane, our tableau appears to carved out of an ancient block of stone. These ancient creatures havedevised this ritualistic tableau to securely hold their inverted sacrificial victim to insure proper blood flow to the neck, because let’s face they want every drop!

VMP701- Vampyre Feasting Tableau Victim- life cast of female victim for ultra realism, with a ghastly gnawed on wound at the neck, internal steel linkage allows pneumatic cylinder to spasmodically ungulate the characters upper torso to have her flail about as her last few drops are consumed.

RD152- Vampyre Feasting Tableau Victim- same as above in static version

VMP702- Vampyre Bat Static- static version of Bat shown below, please specify standing, feeding or flying position.

VMPCostume- Vampyre Bat Costume- Actor wearable costume of Vampyre Bat

VMP703- Feasting Vampyre Bat-
crouched Vampyre features realistic head up/down and panning movements that allow it to bend down and feed at the neck. Independent jaw function and a synchronously triggered recirculating blood pump allow him to lookup from his victim, turn his head towards you smacking his lips as blood gushes from his mouth.

VMP705 - Flying Vampyre Bat
6’6’ tall with a 15’ wing span our Flying Vampyre Bat features the following movements: Wings Up/down, Head left/right & forward/back, Jaw. Steel & fiberglass rod wing assembly covered in spandex. Fly this character indoors or out. Perfect for those crucial overhead scares!

SFX20 - Programmable Prop Wench
This device allows you to fly (raise/lower) your characters synchronous to character action, via aircraft cable and an electric wench. Will handle loads up to 225lbs. with travel up to 30’.

Goblin like Body Snatcher climber features arm, leg and head movements that make it appear to climb up/down a rope in a very realistic and freaky illusion. This effect is perfect for high ceilings, outdoor scenes and to put out on front of your building to attract attention. Character is designed to hold one of the optional victims listed below.

RD150- Body Snatcher Victim- held by Leg
RD151- Body Snatcher Victim- held by Hair
articulated internal steel rod construction allows characters to realistically flop around while being carried by Body Snatchers.

VMP708- 18’ Ancient Ruin Column/Arch

VMP709- 16’ Ancient Ruin Column/Arch

Gothic arches with skeltal column details set the scene indoors or out. Wooden construction with urethane characters, skulls, overlay and details

VMP707-Ancient Ruin Statue Column AirCannon Lunging Blastera

decorative curved column section holds skeletal statue that lunges forward with a powerful blast of air from aircannon directly over your audiences heads.

VMP706-Ancient Ruin Statue Column Static

static version of above

ZMB751- SkelelaBro - Male

6’6” Skeletal Zombiette holds a pair of lit (6) candled candelabra while rotating at the waist, another in our line of fully electronic (no air required) moving effects, plug it into to any wall outlet and away it goes. A very cool and classy piece, that sets the scene while adding movement and lighting effect

ZMB750- SkelelaBera - Female

6’6” Skeletal Zombiette holds a pair of lit (6) candled beaded candelabra while rotating at the waist, another in our line of fully electronic (no air required) moving effects, plug it into to any wall outlet and away it goes. A very cool and classy piece, that sets the scene while adding movement and lighting effect

ZMB752- Upper Torso Wall

Sconce Skelelabera- Upper Torso of Skeletal Zombiette holds a lit (6) candled candelabra while swaying and rotating it in a creepy movement.

Electronic (no air required) moving effect, plug it into to any wall outlet and away it goes.

ZMB753- One Armed Wall Sconce Skelelabera

A decorative wall plaquard with a Skeletal Zombiette arm poking out, holds a lit (6) candled candelabra while slowing raising and lowering it.

Electronic (no air required) moving effect, plug it into to any wall outlet and away it goes.

HODPIANOANI- Haunted Grand Piano Animated

Beautifully detailed gothic piano features Grim Reaper relief sculpture on lid with skull and gold leaf details throughout body, when activated a mob of 13 skeletons come screaming out from under the lid... add the air cannon option to complete this startling effect. Steel internal frame covered with wood with urethane details. Standard unit is designed to accommodate Casio or Yahamaha 88-weighted key electronic keyboard (sold separately) so that an actor can play it or the unit can be outfitted with one of our Digital Sound Effect units for a completely automated effect.

FRN700- Butcher Table HandRunner

the severed upper torso of a bloody victim lays on a butcher table, when activated, the character springs to life and “runs” on it’s hands down the table 4’ towards your audience, apparently propelling itself by its hands. A pair of cylinders in each arm, along with a torso cylinder and neck pivots give this character all of its crazy movements, while sturdy bearings inserted into an iron track system are powered by a heavy duty cylinder.. A very loud, terrifying effect.

FRN701- Love Seat Leaper

Love Seat Leaper are perfectly camouflaged ghoul lies waiting to spring out, up and over to bang and thrash on an adjacent coffee table... features crazy arm movements, a loud terrifying effect they will never see coming.

FRN702 - Coffee Table Corpses

Coffee Table Corpsesa group of (5) Skeletal Ghouls lie waiting to spring out from under the hidden lid of a wooden coffee table.

CHR402- Mango PitchFork- 8’6”

Mango armed with a 11’ long pitchfork flails around an unfortunate victim skewered on the end of it. Powerful left and right arm movements flip our ragdoll victim violently 12’ into the air, while Mango’s head thrashes back/forth and left/right.

FIX700- Trophy Buck Blaster

The gnarled and bloody Head of a trophy buck is mounted high on the wall, when activated the remaining skinned entire Body of the deer jumps thru the opening of the wall thrashing and kicking as the deer has been skinned and mounted alive! Character movements include independent leg, torso up/down, torso left/right, articulating head. A violent disturbing display that they will never see coming.

RD153- Trophy Buck Bloody Head

The gnarled and bloody Head of a trophy buck is mounted on wooden placard.

FIX702- Fireplace/Floor HandRunner

Designed to come out of a fireplace or to crawl out and across any floor, the Upper torso of this ghoulish character travels 4’ apparently propelling itself by its hands. A pair of cylinders in each arm, along with a torso cylinder and neck pivots give this character all of its crazy movements, while sturdy bearings inserted into an iron track system are powered by a heavy duty cable cylinder.

FIX701- Wolf Drop Portrait Blaster

Portrait drops with a Whack!!! as a ferocious Wolf lunges thru the opening, jaw snapping head thrashing. Fast easy and effective!

FIX703- Ghoul out of Dresser

Two of this dressers four drawers bang in and out and then when activated a skeletal creep blasts thru the top lid to stand 7’6” in the air.

GD90- Tyranoid Mega SkeleBlaster-

Part giant insect, part giant alien, but all evil, this creature roars up from a resting height of 5’ to stand and impressive 15’ in the air. Character includes head, jaw, and 4 different arm/claw movements.

Shown coming out of our
HODCRYPT

Haunted Crypt- Family Estate/Crypt features wooden contruction with decorative foam overlay. Use it to adorn your graveyard or in conjunction with one of our Mega SkeleBlasters, as shown above.